Conference Microphone
M-DSP SERIES
MegaPA’s conference microphone system with integrated DSP delivers crystal-clear voice capture and intelligent audio processing. Featuring advanced noise suppression, echo cancellation, and automatic gain control, it ensures smooth and professional communication. Designed for seamless integration, MegaPA conference systems are ideal for meetings, conferences, and corporate environments.
Conference Microphone
M-DSP-U
2CH Class D Amp, 2U rack, 800W @ 8Ω
1600W @ 4Ω, 2200W @ 2Ω
Bridge: 3200W @ 8Ω, 4600W @ 4Ω
Freq: 5Hz–20kHz, ±1dB
THD+N: <0.05%, Slew rate: 20V/μs
Damping >500, S/N ratio >110dB
Input Imp: 20KΩ bal / 10KΩ unbal
Gain: 20–41dB (8 levels)
Input: XLR / Output: Speakon
Size: 483×90×320mm
M-DSP-T
2CH Class D Amp, 2U rack, 1000W @ 8Ω
1800W @ 4Ω, 2520W @ 2Ω
Bridge: 3600W @ 8Ω, 5000W @ 4Ω
Freq: 5Hz–20kHz, ±1dB
THD+N: <0.05%, Slew rate: 20V/μs
Damping >500, S/N ratio >110dB
Input Imp: 20KΩ bal / 10KΩ unbal
Gain: 20–41dB (8 levels)
Input: XLR / Output: Speakon
Size: 483×90×320mm
M-DSP-W
2CH Class D Amp, 2U rack, 1300W @ 8Ω
2350W @ 4Ω, 3300W @ 2Ω
Bridge: 4700W @ 8Ω, 6600W @ 4Ω
Freq: 5Hz–20kHz, ±1dB
THD+N: <0.05%, Slew rate: 20V/μs
Damping >500, S/N ratio >110dB
Input Imp: 20KΩ bal / 10KΩ unbal
Gain: 20–41dB (8 levels)
Input: XLR / Output: Speakon
Size: 483×90×320mm
M-DSP-CENTER
4CH Class D Amp, 2U, 800W @ 8Ω
1450W @ 4Ω, 2000W @ 2Ω
Bridge: 3850W @ 8Ω, 4000W @ 4Ω
Freq: 5Hz–20kHz, ±1dB
THD+N: <0.05%, Slew: 20V/μs
Damping >500, S/N >110dB
Input Imp: 20KΩ bal / 10KΩ unbal
Gain: 20–41dB in 8 steps
Input: XLR / Output: Speakon
Size: 483×90×320mm
M-CM-S
Uses DPLL multi-channel frequency lock
Real-time diversity, auto noise control
UHF band 660–691MHz for interference
M-CM-L
Uses DPLL multi-channel frequency lock
Real-time diversity, auto noise control
UHF band 660–691MHz for interference
M-CM-H
Uses DPLL multi-channel frequency lock
Real-time diversity, auto noise control
UHF band 660–691MHz for interference
M-CM-I
Uses DPLL multi-channel frequency lock
Real-time diversity, auto noise control
UHF band 660–691MHz for interference
319T+319TA
Uses DPLL multi-channel frequency lock
Real-time diversity, auto noise control
UHF band 660–691MHz for interference
TM120-1
Alloy housing, detachable receiver head
Dark gray finish, phantom power 48V
Output interface XLR male connector
Max SPL 120dB, suitable for stage use
Application choir, classroom, vocal, instrument
Sensor type Condenser (Type 16)
Polar pattern Cardioid unidirectional
Frequency range 80Hz–20kHz standard
THD <0.005%, SNR 87dB (A-weighted)
Size/Weight 150.5×21mm, 105g
TM22
Solid metal body, durable and strong
Micro head adjustable 90° angle design
Two output levels 0dB or -14dB selectable
Built-in dual high-pass filter circuits
Ultra-low noise, strong RF interference resist
Built-in pop filter for wind/breath noise
Sensor type Condenser, cardioid pattern
Frequency response 50Hz–20kHz standard
Max SPL 130dB, output impedance 120Ω
Power 48V phantom, high sensitivity